# Modulation Problem

**URL:** <https://www.twowayradioforum.com/t/modulation-problem/10899>\
**Category:** CB Radios\
**Created:** [December 18, 2023, 11:46pm UTC](https://www.twowayradioforum.com/t/modulation-problem/10899 "2023-12-18T23:46:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Buckeye22](https://www.twowayradioforum.com/letter_avatar_proxy/v4/letter/b/d26b3c/32.png) [@Buckeye22](https://www.twowayradioforum.com/u/Buckeye22)\
**Post date:** [December 18, 2023, 11:46pm UTC](https://www.twowayradioforum.com/t/modulation-problem/10899/1 "2023-12-18T23:46:52Z")

</div>

Hello all. This is my first post and I’m just getting back into CB radios after a 45 year lay off 😂. I have a question regarding my CB connected to my amp. I have it all connected through my Dosy Libra meter. The problem I have is with my Roger beep on and when I key my mic my modulation gets stuck at maximum reading and I have to tap on meter to get the needle to release. My mic gain on my power mic is set at 1 and mic gain on radio is set at 2. Any suggestions would be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![paulears](https://www.twowayradioforum.com/user_avatar/www.twowayradioforum.com/paulears/32/408_2.png) [@paulears](https://www.twowayradioforum.com/u/paulears)\
**Post date:** [December 19, 2023, 12:00pm UTC](https://www.twowayradioforum.com/t/modulation-problem/10899/2 "2023-12-19T12:00:20Z")

</div>

See if you can open the meter up, and bend whatever is catching.