# Help Using KG-XS20G Programming Software

**URL:** <https://www.twowayradioforum.com/t/help-using-kg-xs20g-programming-software/11626>\
**Category:** GMRS Radios\
**Created:** [July 23, 2024, 5:44am UTC](https://www.twowayradioforum.com/t/help-using-kg-xs20g-programming-software/11626 "2024-07-23T05:44:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mr.Steve](https://www.twowayradioforum.com/letter_avatar_proxy/v4/letter/m/ec9cab/32.png) [@Mr.Steve](https://www.twowayradioforum.com/u/Mr.Steve)\
**Post date:** [July 23, 2024, 5:44am UTC](https://www.twowayradioforum.com/t/help-using-kg-xs20g-programming-software/11626/1 "2024-07-23T05:44:55Z")

</div>

I have my KG-XS20G programmed with the channels I want , but now I have a new repeater channel that I want to add to it. I would like to insert this repeater channel between two existing channels that I already have programed. An example is : I want to add the new channel in-between line 23 - 24 . So I would add the channel to line 24 and all channels below that would drop down one line.

I can’t seem to find a way to do this. Is there a way to insert a channel ? I am using the programming software for my radio that I downloaded from KG-XS20G page.

Thank you for your help

---

<div class="post-metadata">

**Author:** ![paulears](https://www.twowayradioforum.com/user_avatar/www.twowayradioforum.com/paulears/32/408_2.png) [@paulears](https://www.twowayradioforum.com/u/paulears)\
**Post date:** [July 23, 2024, 6:56am UTC](https://www.twowayradioforum.com/t/help-using-kg-xs20g-programming-software/11626/2 "2024-07-23T06:56:34Z")

</div>

Sadly, you will have to do a lot of typing! I dont think the software allows insert, and i am also pretty sure not even copy and paste. That’s annoyingly common in most cps software.
