Two Way Radio Forum  

Go Back   Two Way Radio Forum > Two Way Radios > Digital Radios

Click here to visit our ecommerce site - BuyTwoWayRadios.com

Reply
 
Thread Tools Display Modes
  #1  
Old 10-23-2018, 10:33 AM
DO3GE DO3GE is offline
Junior Member
 
Join Date: Oct 2018
Posts: 1
Default TYT MD-9600 Problem at using VFO A and B

Hello everybody,

I have been the owner of a TYT MD 9600 for one week.
Although I have collected some experience in the programming of Codeplugs (with RT3), but for 9600 I have a persistent Problem.

I have successfully created a code plug using the VFO A for 70cm and the VFO B for 2m. But now the following apses:

I chose TG 9 for VFO A, for VFO B I have selected a 2m direct frequency.
I am in a QSO on the VFO B in 2m.
If there is a short break in the QSO and a TG on VFO A is being used somewhere on the Reflector, the loudspeaker symbol jumps from VFO B to VFO A.

Then my partner presses on 2m the PTT again I can not hear him, because the speaker icon is on VFO A.

well noticed
It only moves the speaker icon. I do not hear anything. Unless it is sent on the TG that I have selected on VFO A.

How can I stop this behavior? If I have selected a VFO I do not want an automatic change.

I've searched everything, but have found nothing yet. Also on the Internet, I could not find any help or similar Posts.

I would be very happy about this help

vy 73 Thomas, DO3GE
Reply With Quote
Reply

Bookmarks

Tags
automatic vfo change, speaker icon, tyt md 9600, vfo using

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:15 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2018, Cricket Ventures LLC