Two Way Radio Forum  

Go Back   Two Way Radio Forum > Two Way Radios > Consumer (FRS / GMRS) Radios

Click here to visit our ecommerce site - BuyTwoWayRadios.com

Reply
 
Thread Tools Display Modes
  #1  
Old 07-02-2018, 03:01 PM
Moondog Moondog is offline
Junior Member
 
Join Date: Jul 2018
Posts: 2
Default Midland GXT1000 poor send clarity

I've owned a pair of Midland GXT1000 for over 6 years now. I've used them for playing airsoft and running events on 20-120 acre paintball fields the NY Catskills and PA. I would occasionally get complaints from other players about their inability to understand my transmissions and assumed it was terrain or signal interference.

I just discovered it was my Midland radios. They sound ok (perhaps a little low-volume) when I conduct a radio check between my two Midland handsets. But when I transmit to a Motorola, Cobra or Baofeng handset, my voice sounds garbled/crunchy when I speak loudly and faint when I speak in a normal volume. To reiterate: this poor sound quality only occurs when sending FROM my Midlands to other brands. Sending between Midlands sounds ok. Sending from other brands TO the Midlands sounds even better.
• When I talk louder or place my mouth directly above the external mic hole the crunchyness and distortion gets worse
• When I try speeking through an external boom mic or in-cord mic, the poor sound is the same as using the built-in mic
• When I set the Midland on Whisper mode, the sound quality is better (less crunchy) but still is faint compared to other makes
• When I transmit from a Motorola, Cobra or Baofeng to the Midlands my voice sound quality is clear and loud (volume dial on the Midlands set at about 80%)
• Send issues persist whether I use Alkaline or NiMH batteries

Any thoughts on what could be causing my issues? I'm about ready to toss these GXTs because they don't do the job I need them for: 2-way communication
__________________
Inventor of Moodog D-Fog for tactical and sports goggles :: Founder of NYCAirsoft

Last edited by Rick S; 07-10-2018 at 01:02 PM. Reason: Link removed. Please read the Forum Rules before posting.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:33 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2018, Cricket Ventures LLC