Two Way Radio Forum  

Go Back   Two Way Radio Forum > Two Way Radios > CB Radios

Click here to visit our ecommerce site - BuyTwoWayRadios.com

Reply
 
Thread Tools Display Modes
  #1  
Old 05-21-2017, 10:04 PM
Bear Bear is offline
Junior Member
 
Join Date: May 2017
Posts: 3
Default Realistic trc-226

Hi
Anyone know how to fix the "RF out" on the walkie talkie?
I have two & one works fine but the second doesn't seem to be able to send but receives fine?
Thanks.
Reply With Quote
  #2  
Old 05-22-2017, 01:06 AM
Dude111 Dude111 is offline
Member
 
Join Date: May 2016
Posts: 34
Default

Welcome to the site......

Is the antenna connector loose?? -- Im wondering if you try to transmit can a radio CLOSE BY hear it? (That would signify LOW power resulting maybe from an antanna connector that wasnt working right)


Good luck
Reply With Quote
  #3  
Old 05-22-2017, 11:53 AM
Bear Bear is offline
Junior Member
 
Join Date: May 2017
Posts: 3
Default Re: Realistic trc-226

Thanks for a prompt reply. I took the trc-226 casing apart & visually inspected the antenna area for a loose connection .everything thing looked normal. When I hold both sets fairly close & try to transmit through the one with the issue , the second one can hear a can in static also the signal bar indicator shows 3 bars out of 10 but when I move away ( 6-7 ft ) the bar drops of to nothing. Idk if this is any insight value with my issue?
Again . I appreciate any input regarding my trouble.
Reply With Quote
  #4  
Old 05-23-2017, 07:17 PM
jwilkers jwilkers is offline
Moderator
 
Join Date: May 2007
Location: Columbus, OH USA
Posts: 695
Default Re: Realistic trc-226

sounds like the final output transistor may be blown, and the radio is just transmitting via the driver transistor. That's my guess, if all the connections look good.
__________________
Licensed ham: KD8DVR
Licensed GMRS:WQWK521
Disclaimer: All posts are personal opinion only and may not state fact or accusation.
Reply With Quote
  #5  
Old 05-23-2017, 11:42 PM
Bear Bear is offline
Junior Member
 
Join Date: May 2017
Posts: 3
Default Re: Realistic trc-226

Thanks ,all replies appreciated.
Reply With Quote
  #6  
Old 05-24-2017, 01:17 PM
paulears paulears is offline
Senior Member
 
Join Date: Jul 2015
Location: East Anglia, UK
Posts: 248
Default Re: Realistic trc-226

This is a bit like telephoning the doctor for a diagnosis on what's causing your cough? Output stage died. dry joint. power supply to output stage failure. unstable tuned circuit. Component failure.

Some a ten second fix, some an order expensive parts and hope it works cure. Some more likely than others, but you need hands on to diagnose it properly.
Reply With Quote
  #7  
Old 06-02-2017, 08:51 PM
Dude111 Dude111 is offline
Member
 
Join Date: May 2016
Posts: 34
Default

Quote:
Originally Posted by jwilkers
sounds like the final output transistor may be blown, and the radio is just transmitting via the driver transistor. That's my guess, if all the connections look good.
Ya I was just gonna add another reply and say this is what I think it is......


Good luck Bear
Reply With Quote
  #8  
Old 06-04-2017, 11:27 AM
jwilkers jwilkers is offline
Moderator
 
Join Date: May 2007
Location: Columbus, OH USA
Posts: 695
Default Re: Realistic trc-226

Quote:
Originally Posted by Dude111 View Post
Ya I was just gonna add another reply and say this is what I think it is......


Good luck Bear
Great minds think alike
I actually had the same problem on an amateur transceiver I once owned. I just overworked it I guess
__________________
Licensed ham: KD8DVR
Licensed GMRS:WQWK521
Disclaimer: All posts are personal opinion only and may not state fact or accusation.
Reply With Quote
  #9  
Old 11-27-2017, 05:34 AM
Allen12306 Allen12306 is offline
Junior Member
 
Join Date: Nov 2017
Location: Shenzhen,China
Posts: 13
Send a message via Skype™ to Allen12306
Default Re: Realistic trc-226

Quote:
Originally Posted by Bear View Post
Hi
Anyone know how to fix the "RF out" on the walkie talkie?
I have two & one works fine but the second doesn't seem to be able to send but receives fine?
Thanks.
Please check the button is intact or not,then the antenna. If conditions permit,change them separately to determine the cause of issue.And if you have a good habit of using walkie talkie.Never press the button for a long time, that will shorten its service life.If it still doesn't work,then maybe you need to send it to repair shop.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:32 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012, Cricket Ventures LLC